1 wire DS18B20 Temperature Sensor
1.Unique 1 Wire interface requires only one port pin for communcation. Multidrop capability simplifies distrbuted temperature sensing applications.Requires no extenal components
2.Operating temperature range:-55℃ to +125℃， ±0.5℃ accuracy from -10℃ to +85℃
3. Can be powered from data line. Power supply range is 3.0V to 5.5V
4.Thermometer resolution is programmable from 9 to 12 bits.
3.5mm Audio Plug DS18B20 Sensor
BS1 Series Boiler Temperature Sensor
For gas boil temperature control, a very fast thermal response is usually required. This is to ensure accurate temperature control of the hot water to help provide sufficient quantities, maximize boiler efficiency, and also avoid the possibility of scalding. Screw-threaded boss designs, surface sensor fixings for pipes, and simple push-fit/clip-in versions are all available with industry-standard connector options or flying leads if preferred.
BS2 Series Boiler Temperature Sensor
For gas boil temperature control, a very fast thermal response is usually required. This is to ensure accurate temperature control of the hot water to help provide sufficient quantities, maximize boiler efficiency, and also avoid the possibility of scalding. Screw-threaded boss designs, surface sensor fixings for pipes, and simple push-fit/clip-in versions are all available with industry-standard connector options or flying leads if preferred.
BS3 Series Boiler Temperature Sensor
For gas boil temperature control, a very fast thermal response is usually required. This is to ensure accurate temperature control of the hot water to help provide sufficient quantities, maximize boiler efficiency, and also avoid the possibility of scalding. Screw-threaded boss designs, surface sensor fixings for pipes, and simple push-fit/clip-in versions are all available with industry-standard connector options or flying leads if preferred.
Cone Row Compensation Adaptive SPK Inertial Navigation Sensor DETA 30 Series Redundant Heading Gyro Technology
DS18B20 Temperature Sensors
The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of -55°C to +125°C and is accurate to ±0.5°C over the range of -10°C to +85°C. In addition, the DS18B20 can derive power directly from the data line (“parasite power”), eliminating the need for an external power supply.Each DS18B20 has a unique 64-bit serial code, which allows multiple DS18B20s to function on the same 1-Wire bus. Thus, it is simple to use one microprocessor to control many DS18B20s distributed over a large area. Applications that can benefit from this feature include HVAC environmental controls, temperature monitoring systems inside buildings, equipment, or machinery, and process monitoring and control system.
Download
ET1H Series High Precision Miniature Epoxy Coated NTC Thermistor
Miniature leaded epoxy coated thermistors are manufactured using the state of the art manufacturing techniques as those used to produce precision interchangeable devices. This results in devices with superior long term reliability characteristics especially suitable for temperature measurement, temperature control and temperature compensation applications.
Download
ET2E Series Enamelled Wire Epoxy Coated NTC Thermistor
The ET2E series is insulation coating wire NTC thermistor, also known as copper enamelled wire NTC thermistor.The fast electronic thermometer sensor is a component that meets the requirements of electronic thermometer manufacturers to produce fast electronic thermometers. The temperature of the measured object can be sensed within 1 second.The body temperature test may be completed in 5 seconds.
Download
GT1 Series Axial Type Glass Encapsulated NTC Thermistor
The GT1 series thermistors are manufactured using super stable NTC chips which are hermetically sealed in a glass package. They are heat resistant by virtue of glass –sealing. It can be used in many tough environments like oil smoke, dust or humidity.Their uniform dimensions and axial lead configuration make them especially suitable for use with automatic insertion equipment.
Download
GT2 Series Radial Type Glass Encapsulated NTC Thermistor
The GT2 series thermistors is designed for high environmental reliability and wide temperature range of usage (-40℃~300℃) .Lead wires are coming out from one side, called radial lead type. They are heat resistant by virtue of glass –sealing. It is suitable for equipment requiring a quick response and for measurements in a narrow space. It can be applied to various fields, such as home appliance, automobile , medical, and other industrial applications.
Download
