Probe Housing Bullet
Category: TEMPERATURE ELEMENTS
Tags: bullet, probe housing
Related products
MZ6 Series Motor Protection PTC Thermistor
MZ6T PTC motor protection type thermistor is specially designed for over-temperature protection of motors and other parts according to international standards DIN-44081 and DIN-44082. The PTC thermistor is placed in the three-phase winding of the motor. When the temperature reaches the insulation level temperature, the resistance of the PTC rises, and the high-resistance signal is transmitted to the control protector, and the protector disconnects the motor line according to the signal to protect the motor.
Thermal-links/Thermal cut off/Thermal fuse
Alloy Thermal-link/Thermal Cutoff(TCO) is defined as a non-resettable protective device functioning one time only.It is widely used in electrical equipment.Alloy TCO is mainly consist of fusible alloy,flux, plastic or ceramic case,sealant epoxy and lead wires.Normally, fusibel alloy is jointed to the two lead wires.Under abnormal conditions, when the temp reaches to the fusing temp of alloy TCO, the fusible alloy melts and quickly retracts to the two lead wire ends with the aid of the flux and disconnects the circuit completely.
Download
DS18B20 Temperature Sensors
The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of -55°C to +125°C and is accurate to ±0.5°C over the range of -10°C to +85°C. In addition, the DS18B20 can derive power directly from the data line (“parasite power”), eliminating the need for an external power supply.Each DS18B20 has a unique 64-bit serial code, which allows multiple DS18B20s to function on the same 1-Wire bus. Thus, it is simple to use one microprocessor to control many DS18B20s distributed over a large area. Applications that can benefit from this feature include HVAC environmental controls, temperature monitoring systems inside buildings, equipment, or machinery, and process monitoring and control system.
Download
ET1H Series High Precision Miniature Epoxy Coated NTC Thermistor
Miniature leaded epoxy coated thermistors are manufactured using the state of the art manufacturing techniques as those used to produce precision interchangeable devices. This results in devices with superior long term reliability characteristics especially suitable for temperature measurement, temperature control and temperature compensation applications.
Download